FCV SERIES GAS LIFT FLOW CONTROL VALVES Optional Reverse Flow Check Seat APV FCV Series Flow Control Valves are manually adjusted valves designed to provide repeatable settings. Available in 1 and 2-inch body sizes and a wide range of bodies and trim configurations, these valves feature an adjustable handwheel calibrated in sixty-fourths of an inch, and teflon packing for positive seal and maintenance. threaded connections are rated for Service up to 5000 PSI. They are designed to operate in any position and to resist the effects of vibration on the selected setting. Their construction allows easy inspections or replacement of internals without removing the valve from the line. Type 316, 410 or duplex stainless steel bodies, and stainless steel handles and indicator rings are available for corrosive service. Valve trims and seats are available in 1/8, 1/4, 1/2, 3/4 and 1 inch trim sizes in stainless steel, hard chrome and tungsten carbide materials. FCV Flow Control Valve 2-Inch Thread Angle Body FCVT High Temperature Flow Control Valve PAGE 60 2-Inch Through Body 1-Inch Flanged Angle Body APV FCVT High Temperature Flow Control Valves are designed for steam injection or other high temperature gas or liquid service. Rated at 3700 psi working pressure at 150ÂșC, these angle body valves feature 1/4, 1/2, 3/4 and 1 inch size trim with stainless steel, hard chrome or tungsten carbide long throat trim and high temperature packing. The high temperature configuration is also available in adjustable choke valve model (ACVT-5). This valve series is also available with flanged end connections. 11 CHOKES