MATERIAL LIST DIMENSIONS * The Cv factor is the gallons of water per minute that the valve will pass with 1 PSI pressure drop. 2 1 ⁄2” & 3” 3000 psi also available. ITEM DESCRIPTION STAINLESS STEEL CARBON STEEL 1 Body ASTM A351-CF8M ASTM A216-WCB/A108 2 End Cap ASTM A351-CF8M ASTM A216-WCCB/A108 3 Seat NYLON / DELRIN NYLON / DELRIN 4 Ball ASTM A351-CF8M/316 ASTM A351-CF8/304 5 Gasket PTFE PTFE 6 Thrust Washer PTFE PTFE 7 Stem ASTM A276-316 ASTM A276-304 8 Stem Packing PTFE / GRAPHITE PTFE / GRAPHITE 9 Belleville Washer AISI 301 AISI 301 10 Handle AISI 304 ZINC PLEATED STEEL 11 Handle Washer AISI 304 AISI 304 12 Anti-Vibration Nut AISI 304 AISI 301 13 Handle Cover PVC PVC SIZE ØD L H W X Cv* INCH MM INCH MM INCH MM INCH MM INCH MM INCH MM 1 ⁄4” 8 0.50 12.7 2.72 69.0 2.64 67.0 4.80 122.0 1.61 41.0 3 ⁄8” 10 1 ⁄2” 15 16 3 ⁄4” 20 0.75 19.0 33.48 88.5 2.91 74.0 5.83 148.0 1.81 46.0 33 1” 25 1.00 25.40 4.02 102.0 3.15 80.0 6.61 168.0 47 11 ⁄4” 32 1.26 32.00 4.55 115.5 3.39 86.0 81 11 ⁄2” 40 1.50 38.00 4.88 124.0 4.76 121.0 10.23 260.0 105 2” 50 1.75 44.50 5.87 149.0 4.96 126.0 275 12 11 9 8 7 6 5 4 3 2 1 10 13 12 11 9 8 7 6 5 4 3 2 1 10 13 1/4” ~ 3/4” 1” ~ 2” P-T RATINGS DELRIN D 4500 3000 1500 0 -38 0 100 200 300 400 500°F (-34) (-18) (38) (93) (149) (204)(260°C) 310.3 206.8 103.4 0.0 WORKING PRESSURE IN PSIG SERVICE TEMPERATURE WORKING PRESSURE IN BAR NYLON N N 1 ⁄4”-2” D BALL VALVE 3000 PSI FS660 SERIES - (FS660-72) FEATURES • 3,000 PSI cold, Non-shock • Proven Design • Full Port (2” size is full port to schedule 160) • Nylon or Delrin seats, PTFE or graphite seals • Heavy duty lockable handle • Stainless ball and stem • 2 piece body ID# A72-100-AF26 11 BALL VALVES OPTIONS • Padlocking device • 250Lb. steam trim PAGE 86 This catalogue is general in it’s nature and design and can vary at any time. This catalogue is to be used as a guide only.