11 PLUG VALVES OILPATCH PLUG VALVES NON LUBRICATED - SP STYLE Quarter-turn valves for standard and sour gas services to 20,000 psi. Rugged plug valves 1 to 3 inches and with threaded or detachable Weco®™ * style wing union ends. Used for cementing, fracturing, acidizing and other high-pressure lines which handle slurries, abrasives, drilling muds, chemicals and other similar products. These valves are equivalent or similar to FMC®™ * or SPM®™ * style. Floating segments ensure positive seal Two seal segments which float slightly to offset possible micro-expansion of the valve body in extreme high-pressure applications and to ensure a positive seal at all times. Easy operation under pressure The plug valve’s cylindrical plug fits between a set of seal and side segments to prevent the plug from sticking to the valve body, permitting easy operation under pressure. Visible indication of valve position A visible, quarter-turn stop on the plug cap indicated clearly when the valve is fully open or fully closed.A detent spring holds the valve in the desired position. In-line maintenance Can be rebuilt in-line by replacing the side and seal segments. ITEM QTY. DESCRIPTION 1 1 Grease Fitting 2 1 Hex Nut 3 1 Plug Cap 4 1 Gasket 5 1 Body Cap 6 1 O-Ring 7 2 O-Ring / Packing Assy 8 1 Plug 9 2 Seal Segments 10 2 Side Segments 11 2 Seal 12 1 Body, 2” Fem. LPTL 12 1 Body, 2” Fig. 1502 Union Connections 12 1 Body, 2” Fem. LPTL 12 1 Body, 2” Fem. LPTL 12 1 Body, 2” Fig. 1002 Union Connections 13 1 Wrench, Body Cap 14 1 Back-Up Ring 15 1 Retainer Ring 16 3 Segments 17 1 Wing Nut 18 1 Seal Ring 17 16 18 12 B E 15 12 11 9 8 7 10 9 11 10 7 6 14 5 4 13 3 2 1 MATERIALS PAGE 93 * FMC®™ & Weco®™ are registered trademarks of TechnipFMC. SPM®™ is a registered trademarks of The Weir Group. FMC®™ , SPM®™ & Weco®™ are not related to APV or GSL in any way.