Size DN100

Back to FLANGE DIMENSIONS TABLE TYPES page

FLANGE DIMENSIONS TABLE SIZE (DN) 100 (4″)

Class/Table Flange O.D. PCD Bolts Bolt Size Hole Size Minimum Flange Thickness*
Cast Iron Copper Alloy Ductile Iron Steel
ASME Class 125 B16.1 9″ / 229mm 7 1/2″ / 190.5mm 8 5/8″ 3/4″ / 19mm 15/16″ / 24mm 11/16″ / 17mm 15/16″ / 24mm
ASME Class 150 B16.24/B16.42/B16.5 9″ / 229mm 7 1/2″ / 190.5mm 8 5/8″ 3/4″ / 19mm 17.5mm 22mm 22.3mm
ASME Class 250 B16.1 10″ / 254mm 7 7/8″ / 200.0mm 8 3/4″ 3/4″ / 19mm 32mm
ASME Class 300 B16.24/B16.42/B16.5 10″ / 254mm 7 7/8″ / 200.0mm 8 3/4″ 7/8″ / 22mm 1 1/16″ / 27mm 32mm 1 1/4″ / 32mm
ASME Class 600 B16.5 10 3/4″ / 273mm 8 1/2″ / 215.9mm 8 7/8″ 1″ / 25mm 1 1/2″ / 38mm
ASME Class 900 B16.5 11 1/2″ / 292mm 9 1/4″ / 235.0mm 8 1 1/8″ 1 1/4″ / 32mm 1 3/4″ / 44mm
ASME Class 1500 B16.5 12 1/4″ / 311mm 9 1/2″ / 241.3mm 8 1 1/4″ 1 3/8″ / 35mm 2 1/8″ / 54mm
ASME Class 2500 B16.5 14″ / 356mm 10 3/4″ / 273.0mm 8 1 1/2″ 1 5/8″ / 41mm 3″ / 76mm
ISO7005-1/AS4331.1⑤ PN20 (ANSI 150) 230mm 190mm 8 M16 18mm 24mm
ISO7005-1/AS4331.1⑤ PN50 (ANSI 300) 255mm 200mm 8 M20 22mm 32mm
ISO7005-1/AS4331.1⑤ PN110 (ANSI 600) 275mm 216mm 8 M24 26mm 38mm
ISO7005-1/AS4331.1⑤ PN150 (ANSI 900) 290mm 235mm 8 M30 32mm 44mm
ISO7005-1/AS4331.1⑤ PN260 (ANSI 1500) 310mm 241mm 8 M33 35mm 54mm
ISO7005-1/AS4331.1⑤ PN420 (ANSI 2500) 355mm 273mm 8 M39 42mm 76mm
AS2129① Table C 215mm 178mm 4 M16 18mm 22mm 22mm 17mm
AS2129① Table D 215mm 178mm 4 M16 18mm 19mm 16mm 19mm 17mm
AS2129① Table E 215mm 178mm 8 M16 18mm 22mm 16mm 22mm 17mm
AS2129① Table F 230mm 191mm 8 M16 18mm 22mm 17mm 22mm 19mm
AS2129① Table H 230mm 191mm 8 M16 18mm 32mm 19mm 32mm 25mm
AS2129① Table J 230mm 191mm 8 M20 22mm 35mm 35mm
AS4087① PN14 215mm 178mm 4 M16 18mm 22mm 22mm
AS4087① PN16 215mm 178mm 4 M16 18mm 20mm 13mm
AS4087 ①PN21 230mm 191mm 8 M16 18mm 22mm 19mm
AS4087① PN35 230mm 191mm 8 M16 18mm 32mm 22mm 24mm
BS10 Table D 8 1/2″ / 216mm 7″ / 178mm 4 5/8″ 11/16″ / 17mm 3/4″ / 19mm 5/8″ / 16mm 11/16″ / 17mm
BS10 Table E 8 1/2″ / 216mm 7″ / 178mm 8 5/8″ 11/16″ / 17mm 7/8″ / 22mm 5/8″ / 16mm 11/16″ / 17mm
BS10 Table F 9″ / 229mm 7 1/2″ / 191mm 8 5/8″ 11/16″ / 17mm 7/8″ / 22mm 11/16″ / 17mm 3/4″ / 19mm
BS10 Table H 9″ / 229mm 7 1/2″ / 191mm 8 5/8″ 11/16″ / 17mm 1 1/4″ / 32mm 3/4″ / 19mm 1″ / 25mm
BS10 Table J 9″ / 229mm 7 1/2″ / 191mm 8 3/4″ 7/8″ / 22mm 1 3/8″ / 35mm 1 3/8″ / 35mm
BS10 Table K 9 1/2″ / 241mm 7 3/4″ / 197mm 8 7/8″ 1″ / 25mm 1 3/8″ / 35mm 1 3/8″ / 35mm
ISO7005-1/2/ AS4331.1/.2⑤ PN6 210mm 170mm 4 M16 18mm 18mm 16mm
ISO7005-1/2/ AS4331.1/.2⑤ PN10 220mm 180mm 8 M16 18mm 24mm 19mm 20mm
ISO7005-1/2/ AS4331.1/.2⑤ PN16 220mm 180mm 8 M16 18mm 24mm 19mm 20mm
ISO7005-1/2/ AS4331.1/.2⑤ PN25 235mm 190mm 8 M20 22mm 28mm 19mm 24mm
ISO7005-1/2/ AS4331.1/.2⑤ PN40 235mm 190mm 8 M20 22mm 19mm 24mm
BS4504② PN6 210mm 170mm 4 M16 18mm 18mm
BS4504② PN10 220mm 180mm 8 M16 18mm 24mm
BS4504② PN16 220mm 180mm 8 M16 18mm 24mm 16mm 20mm
BS4504② PN25 235mm 190mm 8 M16 22mm 28mm 17mm 24mm
BS4504② PN40 235mm 190mm 8 M16 22mm 19mm 24mm
BS4504② PN64 250mm 200mm 8 M24 26mm 30mm
BS4504② PN100 265mm 210mm 8 M27 30mm 40mm
EN1092-1/2/3③ PN6 210mm 170mm 4 M16 18mm 18mm 16mm
EN1092-1/2/3③ PN10 220mm 180mm 8 M16 18mm 24mm 19mm 20mm
EN1092-1/2/3③ PN16 220mm 180mm 8 M16 18mm 24mm 19mm 20mm
EN1092-1/2/3③ PN25 235mm 190mm 8 M20 22mm 28mm 19mm 24mm
EN1092-1/2/3③ PN40 235mm 190mm 8 M20 22mm 19mm 24mm
EN1092-1/2/3③ PN63 250mm 200mm 8 M24 26mm 30mm
EN1092-1/2/3③ PN100 265mm 210mm 8 M27 30mm 36mm

AS2129 still in use but now only covers Table D to H. Table C now obsolete, Table J to T now replaced by AS4331.1 which is a replication of ISO7005-1 which in turn is equivalent to ASME 150-2500 class ANSI B16.5. AS4331.1 and ISO 7005-1 also incorporates previous DIN PN rated flanging. AS4087 is the new standard covering Table D to H. The same drilling is specified but the PN rating system is used (PN14 to PN35) and in some cases flange thickness varies slightly. AS4087 PN14 & PN16 are the same drilling as AS2129 Table D. AS4087 PN21 is the same drilling and rating as AS2129 Table F. AS4087 PN14 & PN16 is the same drilling as AS2129 Table D. AS4087 PN21 is the same rating and drilling as AS2129 Table F and PN35 is the same drilling as Table H. AS4087 specifies raised face in Ductile Iron PN16 & PN35 and flat face in Grey Cast Iron PN14, PN21, PN35. Click here to view full AS4087 flanging dimensions.

② British metric standard BS4504 is now obsolete and replaced by EN1092-1 edition 09-2008 for steel flanges which also incorporates DIN2501 standard. EN1092-1 is also published in the British standards as BS-EN1092-1. Flange drillings in EN1092-1 are generally the same as BS4504 but EN1092-1 covers a wider range.

EN1092-1 is for steel flanges, EN1092-2 is for Iron flanges, EN1092-3 is for Copper Alloy flanges, EN1092-4 is for Aluminium flanges. Regarding EN1092-2 Iron flanges, these figures are for integral flanges on valves, etc. Cast (Grey) Iron thicknesses are shown in Cast Iron column. EN1092-2 specifies a thinner flange thickness for Ductile Iron in larger sizes which is shown in the Ductile Iron column. For full EN1092-1 table Click here EN1092-1 is for steel flanges.

Refer EN1092-3 copper alloy, EN1092-4 aluminium alloy.

ISO7005-1 & ISO7005-2 (which AS4331.1/2 mirrors) replaces DIN 2501 & DIN 2533 and BS4504 PN6 to 40. ISO7005-1 & 7005-2 PN6 to 40 is the same as EN1092-1/2 (note some flanges thicknesses vary slightly) but also incorporates ANSI flanging redesignated as PN20, PN50, PN110, PN150, PN260, PN420. ISO7005-1/AS4331.1 is steel flanges (ISO7005-1 refers to EN1092-1 for steel flange sizes), ISO7005-2/AS4331.2 is iron flanges, ISO7005-3/AS4331.3 is copper alloy flanges. AS4331.1 is a reproduction of ISO7005-1, AS4331.2 is a reproduction of ISO7005-2, AS4331.3 is a reproduction of ISO7005-3. Note where we combine ISO/AS/EN above, some standards do not publish some flange materials, so do not assume CI/DI/Steel/Copper Alloy is published in all three standards. The thicknesses for integral flanges are not the same as for welding & blind flanges. Furthermore ISO7005-1 PN ratings refer to EN 1092-1 which are also published below. EN 1092-2 ratings are generally also aligned with ISO7005-2 which once again are also published below.

* Varies according to flange type (thickness usually includes raised face height where applicable) refer to standard. Some standards publish integral flange thicknesses used for valves which are often different than blind or welding flange thicknesses hence refer to standard for clarification. Refer links to flange standards in the technical screen of our website.

This above table is a rough ready reckoner only to understand standards, differences & commonality and to assess interchangeability. Refer to the standard required itself before manufacture.

back