Size DN750
FLANGE DIMENSIONS TABLE SIZE (DN) 750 (30″)
| Class/Table | Flange O.D. | PCD | Bolts | Bolt Size | Hole Size | Minimum Flange Thickness* | |||
|---|---|---|---|---|---|---|---|---|---|
| Cast Iron | Copper Alloy | Ductile Iron | Steel | ||||||
| ASME 25 B16.1 (Flat Face) | 985mm | 914mm | 28 | 1 1/4″ | 25.4mm | 38.1mm (ALL) |
|||
| ASME 125 B16.1 (Flat Face) | 985mm | 914mm | 28 | 1 1/4″ | 35mm | 54mm (ALL) |
|||
| ASME 150 B16.47 Series A Supersedes MSS-SP44 | 984.3mm | 914.4mm | 28 | 1 1/4″ | 35mm | 74.7mm WN & BL |
|||
| ASME 250 B16.1 (Raised Face*) | 1090mm | 997mm | 28 | 1 3/4″ | 50.8mm | 76.2mm (ALL) | |||
| ASME 300 B16.47 Series A Supersedes MSS-SP44 | 1092.3mm | 996.9mm | 28 | 1 3/4″ | 47.7mm | 92mm WN 95.3mm BL |
|||
| ASME Class 600 B16.47 Series A Supersedes MSS-SP44 | 1130.4mm | 1022.3mm | 28 | 2″ | 53.8mm | 114.4mm WN 139.8mm BL |
|||
| ASME Class 900 B16.47 Series A Supersedes MSS-SP44 | 1232mm | 1085.8mm | 20 | 3″ | 79.2mm | 149.4mm WN 184.4mm BL |
|||
| ASME 150 B16.47 Series B Supersedes API-605 | 887.5mm | 846mm | 44 | 13/16″ | 22.3mm | 44.5mm WN 50.9mm BL |
|||
| ASME 300 B16.47 Series B Supersedes API-605 | 990.7mm | 920.7mm | 36 | 1 3/8″ | 38.1mm | 93.8mm WN & BL |
|||
| ASME Class 600 B16.47 Series B Supersedes MSS-SP44 | 1022.4mm | 927.1mm | 28 | 1 7/8″ | 50.8mm | 125.5mm WN 127.11 BL |
|||
| ASME Class 900 B16.47 Series B Supersedes MSS-SP44 | 1181.2mm | 1035mm | 20 | 3″ | 79.2mm | 155mm WN & BL |
|||
| ISO7005-1/AS4331.1/.2⑤ PN20 (ANSI 150) | 985mm | 914mm | 28 | M33 | 35.5mm | 74.5mm | |||
| ISO7005-1/AS4331.1/.2⑤ PN50 (ANSI 300) | 1090mm | 997mm | 28 | M45 | 48mm | 92mm | |||
| ISO7005-1/AS4331.1/.2⑤ PN110 (ANSI 600) | 1130mm | 1022mm | 28 | M52 | 55mm | 114mm | |||
| ISO7005-1/AS4331.1/.2⑤ PN150 (ANSI 900) | 1230mm | 1086mm | 20 | M76 | 80mm | 149mm | |||
| ISO7005-1/AS4331.1/.2⑤ PN250 (ANSI 1500) | – | – | – | – | – | – | |||
| ISO7005-1/AS4331.1/.2⑤ PN420 (ANSI 2500) | – | – | – | – | – | – | |||
| AS2129① Table D | 995mm | 927mm | 20 | M30 | 33mm | 41mm | 41mm | 47mm | |
| AS2129① Table E | 995mm | 927mm | 20 | M33 | 36mm | 48mm | 48mm | 60mm | |
| BS3293 Class 150 | 984.3mm | 914.4mm | 28 | M33 | 34.9mm | 54mm | |||
| BS3293 Class 300 | 1092mm | 997mm | 28 | M45 | 48mm | 92mm | |||
| BS3293 Class 600 | 1130mm | 1022mm | 28 | M52 | 54mm | 1130mm | |||
| BS10 Table D | 995mm | 927mm | 20 | M30 | |||||
| BS10 Table F | 1015mm | 940mm | 28 | M33 | |||||
| AS4087 PN14 | 995mm | 927mm | 20 | M30 | 33mm | 48mm | |||
| AS4087 PN16 | 995mm | 927mm | 20 | M30 | 33mm | 47mm | |||
① AS2129 still in use but now only covers Table D to H. Table C now obsolete, Table J to T now replaced by AS4331.1 which is a replication of ISO7005-1 which in turn is equivalent to ASME 150-2500 class ANSI B16.5. AS4331.1 and ISO 7005-1 also incorporates previous DIN PN rated flanging. AS4087 is the new standard covering Table D to H. The same drilling is specified but the PN rating system is used (PN14 to PN35) and in some cases flange thickness varies slightly. AS4087 PN14 & PN16 are the same drilling as AS2129 Table D. AS4087 PN21 is the same drilling and rating as AS2129 Table F. AS4087 PN14 & PN16 is the same drilling as AS2129 Table D. AS4087 PN21 is the same rating and drilling as AS2129 Table F and PN35 is the same drilling as Table H. AS4087 specifies raised face in Ductile Iron PN16 & PN35 and flat face in Grey Cast Iron PN14, PN21, PN35. Click here to view full AS4087 flanging dimensions.
⑤ ISO7005-1 & ISO7005-2 (which AS4331.1/2 mirrors) replaces DIN 2501 & DIN 2533 and BS4504 PN6 to 40. ISO7005-1 & 7005-2 PN6 to 40 is the same as EN1092-1/2 (note some flanges thicknesses vary slightly) but also incorporates ANSI flanging redesignated as PN20, PN50, PN110, PN150, PN260, PN420. ISO7005-1/AS4331.1 is steel flanges (ISO7005-1 refers to EN1092-1 for steel flange sizes), ISO7005-2/AS4331.2 is iron flanges, ISO7005-3/AS4331.3 is copper alloy flanges. AS4331.1 is a reproduction of ISO7005-1, AS4331.2 is a reproduction of ISO7005-2, AS4331.3 is a reproduction of ISO7005-3. Note where we combine ISO/AS/EN above, some standards do not publish some flange materials, so do not assume CI/DI/Steel/Copper Alloy is published in all three standards. The thicknesses for integral flanges are not the same as for welding & blind flanges. Furthermore ISO7005-1 PN ratings refer to EN 1092-1 which are also published below. EN 1092-2 ratings are generally also aligned with ISO7005-2 which once again are also published below.
WN= Weld Neck
BL= Blind
* Varies according to flange type (thickness usually includes raised face height where applicable) refer to standard. Some standards publish integral flange thicknesses used for valves which are often different than blind or welding flange thicknesses hence refer to standard for clarification. Refer links to flange standards in the technical screen of our website.
This above table is a rough ready reckoner only to understand standards, differences & commonality and to assess interchangeability. Refer to the standard required itself before manufacture. Some standards publish integral flange thicknesses used for valves which are often different than blind or welding flange thicknesses hence refer to standard for clarification.